The hardware are the parts of computer itself including the Central Processing Unit (CPU) and related microchips and micro-circuitry, keyboards, monitors, case and drives (floppy, hard, CD, DVD, optical, tape, etc...). Other extra parts called peripheral components or devices include mouse, printers, modems, scanners, digital cameras and cards (sound, colour, video) etc... Together they are often referred to as a personal computer or PC.
Central Processing Unit - Though the term
relates to a specific chip or the processor a CPU's performance is determined by the the rest of the computer's circuitry and chips.
Currently the Pentium chip or processor, made by Intel, is the most common CPU though there are many other companies that produce processors for personal computers. Examples are the CPU made by Motorola and AMD.
With faster processors the clock speed becomes more important. Compared to some of the first computers which operated at below 30 megahertz (MHz) the Pentium chips began at 75 MHz in the late 1990's. Speeds now exceed 3000+ MHz or 3 gigahertz (GHz) and different chip manufacturers use different measuring standards (check your local computer store for the latest speed). It depends on the circuit board that the chip is housed in, or the motherboard, as to whether you are able to upgrade to a faster chip. The motherboard contains the circuitry and connections that allow the various component to communicate with each other.
Though there were many computers using many different processors previous to this I call the 80286 processor the advent of home computers as these were the processors that made computers available for the average person. Using a processor before the 286 involved learning a proprietary system and software. Most new software are being developed for the newest and fastest processors so it can be difficult to use an older computer system.
Keyboard - The keyboard is used to type information into the computer or input information. There are many different keyboard layouts and sizes with the most common for Latin based languages being the QWERTY layout (named for the first 6 keys). The standard keyboard has 101 keys. Notebooks have embedded keys accessible by special keys or by pressing key combinations (CTRL or Command and P for example). Ergonomically designed keyboards are designed to make typing easier.
Some of the keys have a special use. There are referred to as command keys. The 3 most common are the Control or CTRL, Alternate or Alt and the Shift keys though there can be more (the Windows key for example or the Command key). Each key on a standard keyboard has one or two characters. Press the key to get the lower character and hold Shift to get the upper.
Removable Storage and/or Disk Drives - All disks need a drive to get information off - or read - and put information on the disk - or write. Each drive is designed for a specific type of disk whether it is a CD, DVD, hard disk or floppy. Often the term 'disk' and 'drive' are used to describe the same thing but it helps to understand that the disk is the storage device which contains computer files - or software - and the drive is the mechanism that runs the disk.
USB Flash drives or thumb drives work slightly differently as they use memory cards to store information on. Digital cameras also use Flash memory cards to store information, in this case photographs.
Mouse - Most modern computers today are run using a mouse controlled pointer. Generally if the mouse has two buttons the left one is used to select objects and text and the right one is used to access menus. If the mouse has one button (Mac for instance) it controls all the activity and a mouse with a third button can be used by specific software programs.
One type of mouse has a round ball under the bottom of the mouse that rolls and turns two wheels which control the direction of the pointer on the screen. Another type of mouse uses an optical system to track the movement of the mouse.
Note: It is important to clean the mouse periodically, particularly if it becomes sluggish. A ball type mouse has a small circular panel that can be opened, allowing you to remove the ball. Lint can be removed carefully with a tooth pick or tweezers and the ball can be washed with mild detergent. A build up will accumulate on the small wheels in the mouse. Use a small instrument or finger nail to scrape it off taking care not to scratch the wheels. Track balls can be cleaned much like a mouse and touch-pad can be wiped with a clean, damp cloth. An optical mouse can accumulate material from the surface that it is in contact with which can be removed with a finger nail or small instrument.
Monitors - The monitor shows information on the screen when you type. This is called outputting information. When the computer needs more information it will display a message on the screen, usually through a dialog box. Monitors come in many types and sizes from the simple monochrome (one colour) screen to full colour screens.
Most desktop computers use a monitor with a cathode tube and most notebooks use a liquid crystal display (LCD) monitor.
To get the full benefit of today's software with full colour graphics and animation, computers need a color monitor with a display or graphics card.
Printers - The printer takes the information on your screen and transfers it to paper or a hard copy. There are many different types of printers with various levels of quality. The three basic types of printer are; dot matrix, inkjet, and laser.
Dot matrix printers work like a typewriter transferring ink from a ribbon to paper with a series or 'matrix' of tiny pins.
Ink jet printers work like dot matrix printers but fires a stream of ink from a cartridge directly onto the paper.
Laser printers use the same technology as a photocopier using heat to transfer toner onto paper.
Modem - A modem is used to translate information transferred through telephone lines or cable.
The term stands for modulate and demodulate which changes the signal from digital, which computers use, to analog, which telephones use and then back again. A high speed connection also requires a modem but because the information is transferred digitally it isn't required to change the signal from digital to analog but is used to create the connection between your computer and the computer you are connecting with.
Modems are measured by the speed that the information is transferred. The measuring tool is called the baud rate. Originally modems worked at speeds below 2400 baud but today analog speeds of 56,000 are common. Cable, wireless or digital subscriber lines (DSL) modems can transfer information much faster with rates of 300,000 baud and up.
Modems also use Error Correction which corrects for transmission errors by constantly checking whether the information was received properly or not and Compression which allows for faster data transfer rates. Information is transferred in packets. Each packet is checked for errors and is re-sent if there is an error.
Anyone who has used the Internet has noticed that at times the information travels at different speeds. Depending on the amount of information that is being transferred the information will arrive at it's destination at different times. The amount of information that can travel through a line is limited. This limit is called bandwidth.
There are many more variables involved in communication technology using computers, much of which is covered in the section on the Internet.
Scanners- Scanners allow you to transfer pictures and photographs to your computer. A scanner 'scans' the image from the top to the bottom, one line at a time and transfers it to the computer as a series of bits or a bitmap. You can then take that image and use it in a paint program, send it out as a fax or print it. With optional Optical Character Recognition (OCR) software you can convert printed documents such as newspaper articles to text that can be used in your word processor. Most scanners use TWAIN software that makes the scanner accessable by other software applications.
Digital cameras allow you to take digital photographs. The images are stored on a memory chip or disk that can be transferred to your computer. Some cameras can also capture sound and video.
Case - The case houses the microchips and circuitry that run the computer. Desktop models usually sit under the monitor and tower models beside. They come in many sizes, including desktop, mini, midi, and full tower. There is usually room inside to expand or add components at a later time. By removing the cover off the case you may find plate covered, empty slots that allow you to add cards. There are various types of slots including IDE, ASI, USB, PCI and Firewire slots.
Notebook computers may have room to expand depending on the type of computer. Most Notebooks also have connections or ports that allows expansion or connection to exterior, peripheral devices such as monitor, portable hard-drives or other devices.
Cards - Cards are components added to computers to increase their capability. When adding a peripheral device make sure that your computer has a slot of the type needed by the device.
Sound cards allow computers to produce sound like music and voice. The older sound cards were 8 bit then 16 bit then 32 bit. Though the human ear can't distinguish the fine difference between sounds produced by the more powerful sound card they allow for more complex music and music production.
Colour cards allow computers to produce colour (with a colour monitor of course). The first colour cards were 2 bit which produced 4 colours [CGA]. It was amazing what could be done with those 4 colours. Next came 4 bit allowing for 16 [EGA and VGA ] colours. Then came 16 bit allowing for 1064 colours and then 24 bit which allows for almost 17 million colours and now 32 bit is standard allowing monitors to display almost a billion separate colours.
Video cards allow computers to display video and animation. Some video cards allow computers to display television as well as capture frames from video. A video card with a digital video camera allows computers users to produce live video. A high speed or network connection is needed for effective video transmission.
Network cards allow computers to connect together to communicate with each other. Network cards have connections for cable, thin wire or wireless networks. For more information see the section on Networks.
Cables connect internal components to the Motherboard, which is a board with series of electronic path ways and connections allowing the CPU to communicate with the other components of the computer.
Memory - Memory can be very confusing but is usually one of the easiest pieces of hardware to add to your computer. It is common to confuse chip memory with disk storage. An example of the difference between memory and storage would be the difference between a table where the actual work is done (memory) and a filing cabinet where the finished product is stored (disk). To add a bit more confusion, the computer's hard disk can be used as temporary memory when the program needs more than the chips can provide.
Random Access Memory or RAM is the memory that the computer uses to temporarily store the information as it is being processed. The more information being processed the more RAM the computer needs.
One of the first home computers used 64 kilobytes of RAM memory (Commodore 64). Today's modern computers need a minimum of 64 Mb (recommended 128 Mb or more) to run Windows or OS 10 with modern software.
RAM memory chips come in many different sizes and speeds and can usually be expanded. Older computers came with 512 Kb of memory which could be expanded to a maximum of 640 Kb. In most modern computers the memory can be expanded by adding or replacing the memory chips depending on the processor you have and the type of memory your computer uses. Memory chips range in size from 1 Mb to 4 Gb. As computer technology changes the type of memory changes as well making old memory chips obsolete. Check your computer manual to find out what kind of memory your computer uses before purchasing new memory chips.